Floor Covering Reference Manual
  • Main Index
  • General Requirements
  • Resilient
  • Carpet
  • Hardwood
  • Laminate
  • Cork / Bamboo

DD2 - NOFMA NAILING SCHEDULE

Picture
  • For 3/4" solid wood flooring: Fasten each board with a minimum of two fasteners 1”-3” (2.5-7.6 cm) from the ends. 
  • For nailing engineered flooring refer to the manufacturers recommended schedule for fastener placement.
  • Staggering: To ensure a more favorable overall appearance end-joints of adjacent rows should be staggered a minimum of 4”-6” (10-15 cm) when possible, or a distance (minimum) apart equal to the width of the (widest) planks being installed.
U shaped staples
Picture
Cleats
Picture
Use 15 Gauge 2" long staples when installing 3/4" solid t&g wood flooring over wood sub-floors with joists.
or 2" long cleat nails when installing 3/4" solid t&g wood flooring over a wood sub-floor with floor joists.
NFCA © COPYRIGHT 2015. ALL RIGHTS RESERVED.